僅供個人參考

  鄂(e)式閘門适用于堆比重≤2.5t/m3的各類礦石、煤炭、焦炭、灰渣、化工産品等散狀物料，廣泛應用于建材、冶金、化♊工、玻🈲璃等🏃🏻‍♂️行業的倉🈲底卸♻️料。

  The valve is widely used in building material, metallurgy, chemical and glass industries etc to discharge at the bottom of storage. It is suitable for loosing material whose conglomeration specific gravity is less than 2.5t/m3 such as all kinds of ore, coal, coke, dust slag and chemical product.

結構特點：

Structure characteristic:

  鄂式閘門采用優質碳鋼焊接成形，結構獨特，運行靈活可♊靠，無卡阻現象。配用不同的傳動裝置能滿⚽足不同的❄️工況需要🐉。電動🈲鄂式閘門采用帶有超載保護裝🏃置的電動推杆，可避免燒壞電💃🏻機，可以遠距離操縱或程序控制，往複行程可以精确調節位置🧑🏾‍🤝‍🧑🏼自鎖。電液動鄂式閘門采用電液推杆🌈，全液壓傳動，推拉力均可實現無級調速。氣動鄂式閘門采用氣動推杆，通🙇‍♀️過配件✊組合可以遠距離操縱或現場控制。SEF為手動，DEF為電動，YEF為電液動，QEF為氣動。

  The valve is welded in fine steel, having the features of peculiar structure, non-obstruction, reliable and flexible operation. It can meet different working condition equipped with different transmission devices. The electric draw stem is equipped with overload protector, which can avoid damage of motor. Program or remote handling can control the electric jaw valve. Reciprocating stroke can adjust position self-locking precisely. The electric hydraulic jaw valve adopts electric hydraulic draw stem and full hydraulic transmission. Thrust and pull can realize stepless velocity modulation. Pneumatic jaw valve adopts pneumatic draw stem and it can control remotely or in local equipped with fittings grouping. SEF denotes manual, DEF denotes electric, YEF denotes electric hydraulic and QEF denotes pneumatic driving.

性能參數：

Performance parameter:

傳動裝置參數：

Transmission device parameters:

EF-C外形連接尺寸：

Appearance joint dimensions:

工作原理：

Working principle

  鄂式閘門由本體、扇形閘闆、軸、齒輪、密封副、執行機構🌈等部件構👉成。手動或執行機構推動搖杆，使齒輪帶動扇形閘闆🧑🏽‍🤝‍🧑🏻沿軸心旋轉，使兩個扇形閘闆向兩邊開啟，物料随🏃‍♀️即下落，待接料⚽裝置滿載後，再由執行機構帶動搖杆，使扇形閘闆複位，關閉🏃‍♀️截斷下落的物料。

  The valve is made up of body, sector gate, axle, gear, sealing pairs and actuator etc. when the rocker is driven by hand or the actuator device, it will drive the gear to make the sector gate rotate and open, then material drop. When the loader is full, the actuator will drive the rocker to replace the sector gate, and then the falling material will be cut off.

使用說明：

Usage explanation

l  安裝時請注意閘門本體上标明介質流向。兩法蘭連接時必需加密封墊片，然後均勻鎖緊螺栓。

l  運行時請辨清扇形閘闆開關方向，執行機構請正确👅接線。

l  運行時請定期給各傳動部位加潤滑油。

l   Pay attention to the flow direction of medium marked on the body. Add the sealed shim between the two flanges and then screw down the bolt.

l   Pay attention to the open-close direction of the gate when operate. The actuator must be wired exactly.

l   Add lubricant to the transmission parts regularly as it runs.